Fault analysis and solution of wood engraving machine motor
Sep 15, 2018

As a high-tech automated mechanical equipment, woodworking engraving machines are applied to various industries and fields, bringing greater profits to customers. However, as a mechanical equipment that runs all the year round, there will definitely be some loss of consumables and spare parts. For example, spindle motors, tools, sliders, etc. are the main consumables for woodworking engraving machines. Therefore, as a user of woodworking engraving machines, it is very important to better understand and master the replacement and maintenance methods of these consumables.


Brief introduction; woodworking engraving machine stepper motor and driver failure solution; woodworking engraving machine efficient processing performance has brought more profits to many customers. Many customers have seen the use of Jinan engraving machine manufacturers to understand and purchase equipment, but in the face of the mixed market, it also brings certain difficulties to customers to purchase equipment. If you are not careful, you will choose because of the attractive price of low price. Buying a device that is not suitable for use, not only brings economic losses to customers, but also more important delays in production.


Today we will introduce the problems and solutions of the woodworking machine spindle motor.

Fault phenomenon: The spindle motor of the woodworking engraving machine suddenly stops, and the inverter displays ERR01; sometimes the motor is energized with a humming sound, but it does not turn. Solution:

1. The spindle motor to the inverter three-wire cable connector is disconnected. Solution: Re-plug or re-connect and try again.

2. The inner lead of the woodworking engraving machine spindle motor is welded. Confirmation method: Multimeter between the three cores of the spindle motor socket. Solution: Remove the socket and re-weld the wire.

3. The spindle motor to the inverter three-wire cable is broken. Confirmation method: The resistance between the plugs at both ends of the multimeter cable. Solution: Connect the disconnection or change the line.

  • facebook