Categories

Knowledge

Four major faults common in woodworking engraving machine spindles
Aug 24, 2018

Four major faults common in woodworking engraving machine spindles



The spindle is an important part of the woodworking engraving machine. If the spindle fails, it will directly affect the normal operation of the woodworking machine and cause economic losses. Jinan Day Max CNC shares the four major faults and solutions common to the spindle.

1. The spindle motor is hot.

Solution: Check if the pump is working properly and if the circulating water is below the liquid level.

2. The spindle motor sound is abnormal.

Solution: 1) Whether the motor is overloaded or not 2) There is a fault inside the motor, and it can be repaired or replaced.

3. The spindle motor is weak.

Solution: Check if the motor line is out of phase and the cable is shorted.

4. The spindle motor is reversed.

Solution: Check if the motor line is out of phase or swap the output UVW end.

Friendship reminds the majority of users, in case of failure, please call the after-sales phone in time, do not dismantle it.


  • QR CODE
  • facebook