How To Judge The Quality Of Woodworking Engraving Machine
Aug 23, 2018

There are many factors to measure the performance of woodworking engraving machine, not only the overall configuration of the machine, but also the assembly precision of the machine. These are mainly reflected in the verticality, flatness, positioning accuracy, repeat positioning accuracy and other parameters of the equipment. . The perpendicularity between the axes mainly affects the dimensional accuracy of the workpiece. The typical performance of the XY axis with a large verticality is that the diagonal of the rectangle is not equal. The typical verticality of the Z-axis and the XY plane is that the flat-blade milling plane is used. When the surface is not flat; the flatness mainly affects the difficulty of leveling the sheet and the workpiece. So how do you judge the quality of the woodworking machine? The following Daymax cnc is for everyone to analyze:


After the assembly and debugging of the machine is completed, the surface of the engraving machine should be flattened to ensure the flatness; the positioning accuracy affects the dimensional error of the workpiece, which is mainly determined by the precision of the lead screw, the compensation ability of the control system, and the change of the ambient temperature. When the machining range exceeds 300 mm, the influence of the positioning accuracy on the workpiece size must be considered; the repeated positioning accuracy mainly affects multi-tool machining and multi-step machining. The engraving machine is generally driven by a roller screw, and there is no creeping phenomenon, so micro feed can be realized. The repeat positioning accuracy is mainly determined by the control accuracy.


The rack-driven engraving machine is less accurate than the screw-driven engraving machine. Only the above mentioned indicators can meet the requirements to be a qualified woodworking engraving machine. These precisions are mutually dependent on each other, and one failure will affect another precision of the machine. If the machine is not up to standard, then the processed things are definitely less accurate.

  • facebook